626 series

rolling-service-door-626-advanced-600

RapidSlat® Model 626

This insulated advanced service door is perfect for climate controlled situations and applications with weather extremes such as external doors on a food manufacturing facility.​

Features

Standard max width 
up to 20' (6096 mm) depending on gauge and slat type

Standard max height 
up to 20' (6096 mm) depending on gauge and slat type

Insulation 
R-value of 7.71 (1.35 W/m2) for energy-efficiency.
U-value of .13 and sound transmision rating of 21.

Mounting 
Interior or exterior face of wall

Control panel 
Variable frequency drive controller with self-diagnostics (time delay self-close timer and non-resettable cycle counter included); LCD readout, enclosure NEMA 4X rated

Curtain 
Interlocking roll-formed slats, end locks attached to prevent lateral movement.

Flat profile (F-265i) for doors up to 20' wide 24 gauge galvanized steel front and back slats for doors up to 20' wide.

Slat cavity shall be filled with CFC-free, foamed in-place, polyurethane insulation

Curtain finish 
Gray, tan or white PowderGuard®Max powder coat with hardening additive

Bottom bar 
Two PowderGuard® Premium powder coated black angles (min. thickness 3/16”) with 2-wire, self-monitoring, fail safe, electric sensing edge

Hood 
24 gauge galvanized steel primed, black painted; interior hood baffle included

Brackets 
Min. ¼” hot rolled primed, PowderGuard® Premium powder coated black steel

Guides 
Three structural steel angles PowderGuard® Premium powder coated black

Door roll 
Direct driven, springless roll with integrated shafts; self-aligning grease-able sealed bearings; door does not require counterbalance device

Safety devices 
Built-in brake mechanism provides additional peace-of-mind against uncontrolled curtain travel

Wireless monitored safety edge - all doors are equipped with a mandatory reversing or sensing edge to prevent entrapment.

Photoelectric safety sensors with guards - provide additional safety during door operation to help prevent injury and damage

Operation 
Direct drive, integrated gear motor/brake assembly (up to 24” per sec up speed / 12” per sec down speed); drive assembly and limit sensors are factory pre-assembled; manual hand chain for power outage

Actuator 
Single open/close/stop push button station incorporated into control panel

Wind load 
20 psf when optional wear strips are not specified

Warranty 
5 year limited warranty coverage on all mechanical door system components and control panel hardware. ​​

Door Options