620s series

rolling door model 620S

​​​​​​​​EverServe™ Model 620S

​​

​This heavy duty Stormtite™ springless service door is best suited for exterior applications that are exposed to harsh weather. The Model 620S provides security, reliability, ease of serviceability and advanced weather protection. The perimeter seals included in​​ this design help protect against extreme weather conditions.

Features

Standard max width 
up to 20' (6096 mm) depending on gauge and slat type

Standard max height 
up to 20' (6096 mm) depending on gauge and slat type

Mounting 
Interior or exterior face of wall

Control panel 
Electronic controller with microprocessor self-diagnostics. Digital readout indicates door action, alarm conditions, and fault conditions. Time delay self-close timer and non-resettable cycle counter is included. One open/close/stop push button station integrated in control panel. Enclosure is IP54 rated (NEMA 3 equivalent).

Curtain 
Interlocking roll-formed slats, end locks attached to prevent lateral movement; ; Flat profile type F-265 for doors up to 18’'4" wide – 22-gauge galvanized steel; For doors between 18’4” and 20’0” – 20-gauge galvanized steel

Curtain finish 
Gray, Tan, White or Brown polyester top coat

Bottom bar 
Two PowderGuard® Premium powder coated black angles (min. thickness 3/16”) with weatherstrip

Hood 
24-gauge galvanized steel primed; motor and end cover provided

Brackets 
Min. ¼” hot rolled primed, PowderGuard® Premium powder coated black steel

Guides 
Three structural steel angles PowderGuard® Premium powder coated black; With high cycle UHMW wear strip

 

Stormtite™ perimeter seal system 
Exterior guide seal, interior hood baffle, bottom astragal

Door roll 
Direct driven, springless roll with integrated shafts; self-aligning grease-able sealed bearings; door does not require counterbalance device

Safety devices 
Built-in brake mechanism provides additional peace-of-mind against uncontrolled curtain travel.
Photoelectric safety sensors with guards - provide obstruction monitoring during door operation to help prevent injury and damage

Operation 
Direct drive integrated gear/motor/brake assembly; Drive assembly and limit sensors are factory pre-assembled;  Hand chain for power outage. Horsepower appropriate to door size/weight; 230 VAC 3-phase motor

Actuator 
Single open/close/stop push button station incorporated into control panel

Wind load 
20 psf

Warranty 
36 month limited warranty coverage on door system ​​​​

Door Options