661 series

rolling-service-door-611-advanced-600

RapidSlat® Model 611

This advanced service door is well suited for any application that requires a rolling steel door with the added benefits of high cycles, increased productivity and durability including banks, manufacturing facilities, and parking garages. It is ideal for customers in the parking garage market wanting to replace grilles. The fenestrated slats allow air circulation; they are more durable than grilles and more secure than fabric doors.​

Features

Standard max width 
up to 20' (6096 mm) depending on gauge and slat type

Standard max height 
up to 20' (6096 mm) depending on gauge and slat type

Mounting 
Interior or exterior face of wall

Control panel 
Variable frequency drive controller with self-diagnostics (time delay self-close timer and non-resettable cycle counter included); LCD readout, enclosure NEMA 4X rated

Curtain 
Interlocking roll-formed slats, end locks attached to prevent lateral movement; Curved profile type C-187 for doors up to 15'4" wide; 22 gauge galvanized steel; Curved profile type C-275 for doors up to 20' wide; 22 gauge galvanized steel; Flat profile type F-265 for doors up to 20' wide; 22 gauge galvanized steel

Curtain finish 
Gray, tan or white PowderGuard®Max powder coat with hardening additive

Bottom bar 
Two PowderGuard® Premium powder coated black angles (min. thickness 3/16”) with 2-wire, self-monitoring, fail safe, electric sensing edge

Hood 
24 gauge galvanized steel primed, black painted

Brackets 
Min. ¼” hot rolled primed, PowderGuard® Premium powder coated black steel

Guides 
Three structural steel angles PowderGuard® Premium powder coated black

Door roll 
Direct driven, springless roll with integrated shafts; self-aligning grease-able sealed bearings; door does not require counterbalance device

Safety devices 
Built-in brake mechanism provides additional peace-of-mind against uncontrolled curtain travel.

Wireless monitored safety edge - all doors are equipped with a mandatory reversing or sensing edge to prevent entrapment.

Photoelectric safety sensors with guards - provide additional safety during door operation to help prevent injury and damage

Operation 
Direct drive, integrated gear motor/brake assembly (up to 24” per sec up speed / 12” per sec down speed); drive assembly and limit sensors are factory pre-assembled; manual hand chain for power outage

Actuator 
Single open/close/stop push button station incorporated into control panel

Wind load 
20 psf when optional wear strips are not specified

Warranty 
5 year limited warranty coverage on all mechanical door system components and control panel hardware. ​​​

Door Options