610s series

rolling door model 610S

EverServeTM Model 610S​

This heavy duty springless service door is well suited for applications that require the security and performance of a rolling service door with the added benefits of increased cycle life, reliability, and ease of serviceability. The fenestration option allows for air circulation and visibility, making it an ideal solution for facility managers seeking to replace parking garage grilles.

Features

Standard max width 
up to 20' (6096 mm) depending on gauge and slat type

Standard max height 
up to 20' (6096 mm) depending on gauge and slat type

Mounting 
Interior or exterior face of wall

Control panel 
Electronic controller with microprocessor self-diagnostics. Digital readout indicates door action, alarm conditions, and fault conditions. Time delay self-close timer and non-resettable cycle counter is included. One open/close/stop push button station integrated in control panel. Enclosure is IP54 rated (NEMA 3 equivalent).

Curtain 
Interlocking roll-formed slats, end locks attached to prevent lateral movement; Curved profile type C-187 for doors up to 15'4" wide – 22-gauge galvanized steel; Curved profile type C-275 for doors up to 18’4” wide –22-gauge galvanized steel; Between 18’4” and 20’0” – 20-gauge galvanized steel

Curtain finish 
Gray, Tan, White or Brown polyester top coat

Bottom bar 
Two PowderGuard® Premium powder coated black angles (min. thickness 3/16”) with weatherstrip

Hood 
24-gauge galvanized steel primed; motor and end cover provided

Brackets 
Min. ¼” hot rolled primed, PowderGuard® Premium powder coated black steel

Guides 
Three structural steel angles PowderGuard® Premium powder coated black; With high cycle UHMW wear strip

Door roll 
Direct driven, springless roll with integrated shafts; self-aligning grease-able sealed bearings; door does not require counterbalance device

Safety devices 
Built-in brake mechanism provides additional peace-of-mind against uncontrolled curtain travel.
Photoelectric safety sensors with guards - provide obstruction monitoring during door operation to help prevent injury and damage

Operation 
Direct drive integrated gear/motor/brake assembly; Drive assembly and limit sensors are factory pre-assembled;  Hand chain for power outage. Horsepower appropriate to door size/weight; 230 VAC 3-phase motor

Actuator 
Single open/close/stop push button station incorporated into control panel

Wind load 
20 psf

Warranty 
36 month limited warranty coverage on door system ​​​

Door Options