610 series

rolling-service-door-610-600

Rolling steel door model 610 is a perennial best-seller for good reason. The standard features exceed the norm for quality and a myriad of options allow for true customization. The Model 610 is built with a standard galvanized steel curtain, or an optional stainless steel or aluminum curtain. The standard curtain slat is the attractive C-187 curved profile, with additional slat options available in curved and flat. Finishes range from four standard colors to approximately 200 powder coat colors or matched to your specification. ​ A host of other options — including motor operation, pass doors, exhaust ports, between-jambs mounting, cylinder locks and special usage packages — allow the 610 to be adapted to any environment.

Features

Standard max width 
30'4" (9246 mm)

Standard max height 
28'4" (8636 mm)

Curtain
16 ga. galvanized steel up to 30'4" (9246 mm) width (F-265 only)
18 ga. galvanized steel up to 30'4" (9246 mm) width*
20 ga. galvanized steel up to 25'4" (7722 mm) width*
22 ga. galvanized steel up to 18'4" (5588 mm) width*
24 ga. galvanized steel up to 15'4" (4674 mm) width*
* not all slat profiles

Finish 
Gray, tan, white or brown

Hood 
24 ga. galvanized steel ​

Wind load
20 psf

Standard mounting 
Face of wall ​

Operation 
Manual push-up up to 84 sq. ft. (7804 sq.mm) or 12' x 7' (3658 mm x 2134 mm)
Chain hoist over 84 sq. ft. (7804 sq.mm) or 12' x 7' (3658 mm x 2134 mm)

Standard springs 
20,000 cycle ​

Weatherseals
Bottom bar astragal

Guides 
Three structural steel angles PowderGuard® weathered finish with black powder coat ​

Bottom bar 
Extruded aluminum with weatherseal up to 15'4" (4674 mm)
Back-to-back steel angles with weatherseal more than 15'4" (>4674 mm)

Lock 
Interior slide bolt on push-up
Padlockable chain keeper on chain hoist ​

Warranty 
24-month limited on door
3 year/20,000 cycles limited on door & operator system (when purchased together) ​

Fenestration

fenestration on slats
Curved slat with 3" x 5/8" fenestration
fenestration on slats
F265 slat with 10" x 1" fenestration

​​

Slat profile 
STANDARD - CURVED

C-187 is standard up to 15'4" (4877 mm) wide in 22 Gauge. Other gauge options available.
c-187 slat

C-275 is option up to 15'4" and standard for doors over 15'4" wide (4877 mm). Gauge dependent on opening width. Fenestrations available in uniformly spaced openings of 5/8" x 3" (16 mm x 76 mm).
Perforation or fenestration options available for air and light infiltration available on 18 gauge primed steel only.
c-187 slat

OPTION – FLAT
F-265 available up to 30’4” (9246 mm) wide in 18 gauge. Other gauges available.  Fenestrations available in uniformly spaced openings of 5/8" x 3" (16 mm x 76 mm) or 1" x 10" (mm x mm). Perforation or fenestration options available for air and light infiltration available on 18 gauge primed steel only.

F-265E – 14 gauge extruded aluminum solid slat available up to 20’4” (6198 mm) width.
Perforation or fenestration not available on model 610 on F265E.
F265 slat

C-600 - For special applications requiring herculean size and strength, consider the 610 Series door with C-600 slats. This non-insulated, oversized door fits openings up to a maximum 1500 square feet (139.4 m2.), in widths up to 70' (21,336 mm) and heights up to 30'4" (9246 mm). The curtain is crafted with 6" x 1 3/8" (152 mm x 35 mm) curved, 18, 16 or 14-gauge steel slats for unparalleled strength and durability. No perforation or fenestration on model 610 on C-600.
C600 slat ​​​​​​​​​

Door Options